Posts

NFPA 1901 Specifications for Fire Trucks – (www.tapedealer.com) The marking of fire apparatus and emergency vehicles is outlined in the NFPA 1901 recommendation. The application of reflective tape in the form of chevron striping to the vehicle’s rear, sides, and front is covered in the recommendation. The majority of departments are following this as a…

In 2013 the NFPA officially included Ambulance Chevron Striping guidelines to their recommendations for Ambulances operating in the US. The NFPA 1917 manual contains these guidelines. The recommendations are nearly a duplicate from their NFPA 1901 manual for Chevron Striping for Fire Apparatus made official in 2009, with the addition of Battenberg patterns. It is…

Please note that the following is for informational purposes and is only a portion of the FRA 224 regulations related to rail cars. Companies looking to mark their rail cars should do their research thoroughly by looking at the actual FRA code to see if there have been any updates or changes since this article…

DOT C2 retro reflective tape that alternates between white and red must be used to mark trailers and trucks that are over 80 inches wide and more than 10,000 pounds in weight. (Note –  In the daylight, white is often a silver color). You can use a 6/6 (6′′ red and 6′′ white) or a 7/11 (7′′…

Certain requirements must be met for a tape to be certified as DOT C2, C3, or C4. These rules cover how the tape is made, what color it is, how wide it is, how far apart the different colors are, performance, and how reflective it is. The manufacturer can put DOT C2 certification on a…

You will find below the actual DOT C2 Government document from the FMCSA. This document has some very helpful diagrams and illustrations for the placement of DOT tape. One point is that when applying DOT reflective tape to a truck, the goal is not just to pass an inspection. The goal is to keep other…

The FAA, in 2010, released what they call an Advisory Circular that outlined requirements for marking Airport Vehicles with both lighting and retro reflective tape. As of the date of this article, this circular is still in force. The approved lights, colors, and markings outlined in this regulation assure the conspicuity of vehicles operating in…

By January 17, 2011, all crossbucks at rail-highway crossings must comply with Federal Highway Administration (FHWA) rules and be fitted with reflective strips. At all grade crossings with crossbuck signs installed, excluding those with crossbuck signs installed back-to-back, a two-inch strip of white retro-reflective material must be applied to the back of each crossbuck blade…