Pre-striped chevron marking tape is a highly reflective, pliable reflective sheeting, used for creating chevron panels on the back of fire trucks, utility trucks, and other commercial, government, and industrial vehicles. It is pre printed with red and fluorescent lime stripes, and comes in widths up to 48 inches. This material comes in both left…
DOT tapes are always red and white (silver) and come in two available patterns. 7/11 is a seven inch white, 11 inch red block pattern. 6/6 is an even six inch white, six inch red block pattern. V82 is a 10 year durability type 5 film, and V92 is a 5 year film. Oralite’s DOT…
FRA tape or Rail Car Tape is manufactured by several companies. It comes in yellow or white with yellow being the most popular. This tape is mandated by the FRA (federal railroad administration) for use on all rail cars. We have an article on placement under regulations on this site. FRA 224 tape is a…
Oralite’s R82 RGA (Rail Gate Arm) tape is compliant with both MUTCD and Corp of Engineer standards for marking rail gate arms, control arms, and gates that operate near or on DOT roads. This Type 5 reflective tape is a 16 inch / 16 inch Block Red and White (silver) pattern. It is micro prismatic…
School bus reflective tape is used to make school buses safer. School bus reflective requirements are covered by FMVSS 131 & 217, as well as individual state regulations. In general, all of these regulations require marking window emergency exits and doors, as well as the length the bus. Normally an ASTM D4956 Type 5 retro…
SOLAS (safety of life at sea) is a coast guard approved, marine grade retro reflective tape that is designed for off shore applications on ships, boats, and commercial vessels. SOLAS comes only in a white (grey/silver) color. It is grey in the daytime, and very bright white when reflecting. SOLAS film is not for signs,…
Oralite V92 Daybright Prismatic Retro Reflective is another unique film made only by Orafol. It is a very thin, very bright film, that can be CAD cut. V92 is a metallized prismatic film, which means it is thinner, brighter, and more rugged than air backed films. It can take multiple impacts, and still reflect. This…
V98 Conformable Graphics Film by Oralite is a flexible, conformable, metallized, prismatic sheeting that is CAD cuttable. Because it is not designed to be used on signs, it is not ASTM typed. However, if it was a typed film, it would be equivalent to a type 4 in brightness. V98 is a PVC based film,…
ORAFOL has a variety of retroreflective materials that can be used in photoelectric sensor applications. These materials are made to the highest standards and improve productivity and accuracy. Photo electric tapes are retroreflective materials and work by sending light back to its source. Photo Electric Films can be used in a wide range of situations….
Oralite Marathon and Super Bright roll up sign and banner material is a non adhesive, air backed, prismatic, flexible sheeting that is used for traffic control signing in temporary work zones, utility, and incident management applications. It has a Class 5 backing which simply means “no adhesive”. This material is used almost exclusively for roll…
